(split from somewhere along the TAP Death records topic) In which case you'll have to learn Japanese, go to Japan, buy a TAP machine and the stuff you need to run it, connect the video output to your monitor, and use Hypercam 2.0 to fill it!! Or you could go over to a friend's house with Mame and TAP on a CD.
From now on I need you to do us all a favor. Think VERY hard about what your going to say. Make sure it makes sense. Search for any questions you have before you ask. Do not ask the same question over again, if you have that hard of a time remembering write it down. When making posts PLEASE use helpful titles. And then after you've done all this, make sure you double check what you wrote so you don't get silly mistakes like fill instead of film. Specifics that don't make sense in this post: You don't use a monitor to film, you use a computer, which would require a tv tuner card to do, and in which case you would not use hypercam 2.0 to film it, you would use a standard mpeg2 video software that most likely came with the tv tuner card.
Specifics that don't make sense in this post: You don't use a monitor to film, you use a computer, which would require a tv tuner card to do, and in which case you would not use hypercam 2.0 to film it, you would use a standard mpeg2 video software that most likely came with the tv tuner card.[/quote] But if you were to hook up the video output to the computer... wouldn't the computer display it?
Your computer wouldn't display it. Your MONITOR would display it. Although that is assuming you had a super gun to give you some sort of vga signal. There is a big difference between your monitor and you computer. Hypercam does not record what your monitor is displaying, it is recording what your graphics card is outputting. EDIT: I just completely hijacked this thread with information that is not even related. Would an admin please just delete my last two posts.
